| Customization: | Available |
|---|---|
| After-sales Service: | 1 |
| Warranty: | 1 |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product description
| 90Tons mining dump truck configuration quotation | |
| Cabin: | New reversible wide body offset cab (left rudder) |
| Engine horsepower: | WeiChai 420 /WeiChai 430 |
| Gearbox model: | 7DS220 |
| Steering: | Hydraulic booster steering gear |
| Front/rear axle: | 25T cast steel front axle/ 35T cast steel double stage deceleration middle rear axle |
| Frame: | Rigid box frame, 480*140mm |
| Container size (mm) : | 5850 * 3200 * 1700 |
| Description: | NM450 Wear-resistant high strength plate 16mm, side plate 12mm, front lift, HYVA hydraulic jack, square box |
| Tires: | 14.00R25 mining tyre |
| Front/rear suspension: | Integral welded balance suspension, enhanced detachable balance shaft |
| Front, middle and rear axle plate springs | Front suspension: oil-gas suspension, rear suspension: 120*32*11 |
| Braking system: | SORL system |
| Other: | Three-level sand and dust filter, exhaust brake, discharge stone, chassis protection, battery protection, fuel tank protection, front fender, rearview mirror reinforcement, LED side lights and taillights |
| Preparation mass (kg) : | 32000 |
| Rated load mass (kg) | 60000 |
| Rated total mass (kg) : | 92000 |
| Overall size (mm) : | 9100*3450*4080 |
| Maximum speed (km/h) : | 42 |
| Minimum ground clearance (mm) : | 380 |
| Minimum turning radius (m) : | ≤12 |
| Maximum climbing ability (%) : | 30 |
| Wheelbase (mm) : | 3800+1560 |
| Wheel base (front/rear) (mm) : | 2792,2526 |
| Tank volume (L) : | 450L |
| Paperback volume: | 32m³ |
| Type: | HTC136MT |
| Driving Cab: | HTC3800 Reversible narrow-body offset cab (Left hand) |
| Engine Type/ Horsepower: | Cummins QSM15 77C |
| Transmission Type: | Fast 8DS280 |
| Front/rear axle: | 30T/55T PX30Tcasting steel front axle/PX 55T casting dual reduction middle/rear axle |
| Frame: | Welded Semi-rigid cube type frame 550*155(25+16) |
| Tyre: | 480/95R29 |
| Front/rear suspension: | Front hydro-pneumatic suspension/rear leaf spring, prefabricated |
| Breaking system: | SORL system,Dual circuit brake system |
| Steering Engine: | Full hydraulic power steering engine |
| The air filter: | Tertiary desert filtration |
| Curb Weight(kg): | 45000 |
| Rated load(kg): | 95000 |
| Rated total weight(kg): | 140000 |
| Overall Dimension(mm): | 9950*4200*4500 |
| Max speed(km/h): | 40 |
| Min ground clearance(mm): | 425 |
| Min turning radius(m): | ≤12 |
| Max gradeability(%): | 35 |
| Approach Angle/Departure Angle (°) : | 34/45 |
| Axle base(mm): | 4200+1900 |
| Wheel span (front /rear)(mm): | Front 3064, Rear 2913 |
| Oil tank Capacity(L): | 900L Fuel tank |
| Dimensions inside the container: | 6700*3800*1950 |
| Description: | BHNM40018mm,T70012mm. BHNM400 steel plate bottom plate is 18mm, T700 steel plate side plate is 12mm |
| Hydraulic system | 214 Lifting cylinder |
| Body Capacity: | Flat: 50m³ |
| Remark: |
,,,,, Fuel preheating, electronic radiator, retarder, reverse image, water, centralized lubrication optional |
Product parameters
Company information
| Brand | FAW |
| Driving | 6x4 |
| Engine | 390hp, 420hp,460hp |
| Capacity | 60-70 tons |
| Steering | LHD/ RHD |
){kind=link}