Customization: | Available |
---|---|
After-sales Service: | 1 |
Warranty: | 1 |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product parameters
Mass | Chassis weight (kg) | 2580 | Dimensions | Overall dimensions of truck assembly | Length (mm) | 5960 | ||||||||||||||||
Axle load distribution(kg) | Front | 1500 | Width (mm) | 2040 | ||||||||||||||||||
Rear | 1080 | Height (unload)(mm) | 3310 | |||||||||||||||||||
Curb weight (kg) | Wheel base(mm) | 3330 | ||||||||||||||||||||
Axle load distribution(kg) | Front | Wheel Track(mm) | Front | 1580 | ||||||||||||||||||
Rear | Rear | 1480 | ||||||||||||||||||||
GVW (kg) | 7000 | Min. ground clearance(under rear axle) (mm) | 180 | |||||||||||||||||||
Max. Axle load distribution (kg) | Front | 2300 | Approach angle (°) | 21 | ||||||||||||||||||
Rear | 4700 | Departure angle(°) | 16 | |||||||||||||||||||
Max. traction weight (kg) | --- | Front overhang (mm) | 1115 | |||||||||||||||||||
Max. GVW of tractor and trailer | --- | Rear overhang (mm) | 1580 | |||||||||||||||||||
Max. allowed load on fifth-wheel (kg) | --- | Clearance of fifth-wheel from ground(loaded) mm | --- | |||||||||||||||||||
Performances | Min. steering diameter (m) | 13.9 | Traction pin diam | --- | ||||||||||||||||||
Max. speed (km/h) | 90 | Engine | Model | KTZ54X32S750 | ||||||||||||||||||
Max. gradeability (%) | 20 | Displacement(L) | --- | |||||||||||||||||||
Parking brake grade angle (%) | 20 | Max. output power kW/(r/min) | 60 | |||||||||||||||||||
Direct shift Min. stable speed(km/h) | --- | Max. torque Nm/(r/min) | 500 | |||||||||||||||||||
Direct shift accelerate time (s) (20-70km/h) |
||||||||||||||||||||||
Rated fuel consumption g/(kWh) | ||||||||||||||||||||||
Sliding distance(from 50km/h) (m) | ≥680 | Min. fuel consumption g/(kWh) | --- | |||||||||||||||||||
Braking distance(from 30km/h) (m) | ≤36.7 | Cab | Type | Single Cab | ||||||||||||||||||
Fuel consumption(l/100km) | --- | |||||||||||||||||||||
Fuel tank capacity (L) | --- | Seats | 3 | |||||||||||||||||||
Frame | Type | Side rails, punching and riveted construction | Battery | Brand | CATL | |||||||||||||||||
Main Rail section | 180×65×5+3 (mm) | Volume | 98.04kwh(With heating manage system) | |||||||||||||||||||
Auxiliary rail section | ... | Voltage/rate | 566.72v/173Ah | |||||||||||||||||||
Transmission | Model | J2S35 | Power Steering | Model | EPS power steering gear | |||||||||||||||||
Forward shifts Ratio | i1=2.7,i2=1 | Ratio | 19.5~22.5 | |||||||||||||||||||
Pump Max. pressure(MPa) | 10500 | |||||||||||||||||||||
Reverse shift Ratio | 2.7 | |||||||||||||||||||||
Wheel Alignments | Wheel camber | 1° | Brake System | Rated working air pressure (kPa) | --- | |||||||||||||||||
Kingpin inclination | 8° | Driving Brake | Dual circuit, air pressure brake | |||||||||||||||||||
Caster | 2' | Parking Brake | Central drum brake | |||||||||||||||||||
Toe-in(measured onΦ648 diameter) | 0~2(mm) | Auxiliary Brake | --- | |||||||||||||||||||
Rear Axle | Type | 265 | Electrical System | Type | Single line, negative earthed | |||||||||||||||||
Reduction ratio | 5.857 | Voltage | 24V | |||||||||||||||||||
Generator | --- | |||||||||||||||||||||
differential lock | No | Battery(V/Ah) | 24/45 | |||||||||||||||||||
Body | Measurement (mm) |
No |
Wheel | Rim | 17.5X6.00 | |||||||||||||||||
Tyre | Model | 215/75R17.5 | ||||||||||||||||||||
Air pressure(kPa) | 830 |
Product details
(The actual specification and size are not limited to the above figure, it shall be made based on the customers' requirements.)
Certifications
Company information